Your V-Band Clamp/Coupling Description Code



Step 1 (continued):
Determine Latch & Band or Strap Style Code
Now that you have chosen a configuration, choose the type of latch you want by clicking on the "SELECT" button in the chart next to the item that meets your requirements. Latch styles are shown in detail in the chart at the bottom of the page.

Full Bands: Single Latch

CodeDescriptionClick To Select
V01T-Bolt
V02Quick Release
V03Saddle Quick Release
V07Light-Duty Over Center
V09Medium-Duty Over Center
T-Bolt Latch
The Clampco T-bolt latch is used for permanent or semi-permanent applications and/or safety on pressurized systems. The T-bolt latch is our most economical latch.
Quick Release Latch
The Clampco quick release latch is used for ease of disassembly and is required where the ability to replace bolts is desired.
Saddle Quick Release Latch
The saddle quick release latch is also used for ease of disassembly and where the ability to replace bolts is desired. It is not recommended for diameters larger than 10 in. [254 mm] due to trunnion/band interference.
Light-Duty Over Center Latch
The light-duty over center latch is used on applications that require frequent assembly or disassembly. No tools are required for opening and closing the clamp after initial installation. This latch style is ideal for light-duty applications on small diameters and requires a 3/16 in. diameter T-bolt.
Medium-Duty Over Center Latch
The medium-duty over center latch is well suited for heavier applications and on larger diameters. No tools are required for opening and closing the clamp after initial installation. It is available with either a 1/4 in. or 5/16 in. diameter T-bolt.
Start Over
Call 330-336-8850 or Contact Clampco for Assistance


ISO 9001:2008   ISO 9001:2008 with Design View   |  © 2018 Clampco Products Inc.  |   Site Map   |  
     
Page I.D.